Waste Oil Furnaces – High on Value & Low on Maintenance
Waste oil furnaces from Clean Energy Heating Systems can help your business save money as well as dispose of used petroleum products in an environmentally-friendly way.
By burning used waste oil and converting it into heat for your building, it’s possible to cut your utility bill while knowing that the disposal of your used petroleum products is complying with all regulations. But despite those significant benefits, you might still be on the fence about investing in a waste oil furnace for fear that it might require costly or time-consuming maintenance. You can check that concern off of your list because Clean Energy Heating Systems waste oil furnaces are easy to clean and service.
Here are three primary components of our furnaces that need periodic maintenance.
- The pump, which allows used oil to flow into the burner
- The burner, which burns used oil to create heat
- The furnace cavity itself, which allows air to circulate and move heat out into your facility
Servicing and cleaning these components can be done by referring to your user’s manual or by watching these easy to follow instructional videos. And best of all, it’s likely that you’ll already have the tools you need to perform necessary cleaning and servicing right in your toolbox.
If you’ve got most of the following on hand, you’ll need little else for performing maintenance on your own:
- Allen wrench
- Lubricant spray, such as WD-40
- Open end wrench
- Nut driver
- Deep socket wrench
- Pipe cleaning brush
- Compressed air blow nozzle
- Carburetor cleaner
- Parts washer
- Phillips Head Screwdriver
- Wire brush
In addition to your user’s manual and our online videos, don’t hesitate to call or contact us directly for support if you need additional information about how to correctly clean or service your waste oil furnace. After some initial direction and acclimation to maintaining your waste oil heater, you’ll be well set to do it on your own. It can’t get much better than that!
