Meet The Cost-Saving CE-140 Waste Oil Furnace

Waste oil heating, which recycles used petroleum products into free heat for facilities, is a technology that has enabled many types of businesses to save on their energy expenses. At Clean Energy Heating Systems, we’ve tirelessly dedicated ourselves to the research and development necessary to manufacture waste oil furnaces that offer optimal energy efficiency and cost-saving advantages.

With any of our waste oil furnaces, you can burn used motor oil, hydraulic fluid, ATF fluid, and #2 heating oil—or any combination of these fluids.

Besides cutting heating costs, our waste oil heaters also save you the money and eliminate the headaches associated with disposing of your used oil safely. Waste oil heaters enable you to dispose of your used petroleum products according to EPA regulations.

Waste oil heaters are a win all around, and at Clean Energy Heating Systems we make equipment to fit the needs of businesses of all sizes.

In this article, we’ll give you a chance to get to know one of our furnaces a little better. Read on to learn a little more about our CE-140 waste oil furnace!

Why Choose the CE-140 Waste Oil Furnace?

For smaller businesses, such as garages with one to four bays, this furnace makes a perfect entry-level waste oil furnace. It heats up to 4,000 square feet.

Its innovative design offers the below features, specifications, and advantages:

  • Resistant to rust and corrosion because of stainless steel heat exchanger and flue tubes – We designed the heat exchanger and flue tubes to minimize the amount of heat that can escape and maximize heat production. Also, the flue tubes are swedged, rather than welded, so they resist cracks.
  • Easy cleanout – Over center latches make cleaning a breeze.
  • Long service intervals – Our furnaces typically need servicing only every 1,000+ hours of use—and sometimes even less frequently. With their easy-access oil line connector block, they enable servicing without disconnecting the oil line.
  • Reliable operation – Digital, programmable burner controls eliminate user error and oversight.
  • Successful in UL “cold oil start” tests – Thanks to a pre-heater with thermostatic control.
  • Space efficient – The dimensions (burner and blower) are 77″l x 28″h x 26″w. This furnace doesn’t demand a lot of your precious floor space. You can save even more space by using our Waste Oil Heating Center.

And that’s not all, the CE-140 also features:

  • Pre-assembled, vacuum-tested metering pump that requires no user adjustment
  • 140,000 BTU per hour output
  • 1,700/75°F, air flow output CFM/heat rise
  • 1.0 GPH fuel consumption
  • 115vac, 60hz, single phase, 20A breaker
  • 6″ chimney outlets on left or right side
  • Ability to mount on tank, wall, or ceiling

The CE-140 is UL and cUL Listed, and it comes with a 10-year warranty. We make it right here in the USA. With no-interest financing available, we make it affordable for you to start saving on your energy costs by recycling your used oil.

Contact us today to discuss how waste oil heating can benefit your business’s bottom line and to learn about our other waste oil furnaces, our waste oil boiler, the space-saving heating center, and furnace accessories.